Recently Updated Pages

iBMC Lockout (Incorrect user name or password)

After several (5 by default) incorrect attempts to log in to iBMC, you will be temporarily locke...

mdadm: Replacing a faulty drive

First, which drive is failed will have to be determined, which can be read from the mdstat file ...

Dell PowerEdge R230 Default iDRAC Password

When restting iDRAC to it's factory settings, your iDrac login credentials will reset to factory...

Slow installation mdadm RAID5

When installation your operating system on (primarily) large storage devices placed in RAID5 usi...

Unable to send mail to Microsoft services

If you are unable to send any e-mails to Microsoft services, which include outlook.com, hotmail....

Configuring multiple IPv4 addresses in Linux

Debian Based (Debian & Ubuntu) Use your favourite text editor to edit the network interface...

Useful (hp)ssacli commands

Show all drives and how they are configured:ssacli ctrl all show configShow detailed configured ...

Resetting a BIOS Password

The only way of resetting a BIOS password if you no longer have access to the password, is by pe...

Testing Drive Speed in Linux

DD A very reliable test to determine the current write speeds of your drive or array can be done...

Drive Bay Numbering per Server

HP DL120 G6 1 2 3 4 HP DL160 G6 1 2 3 4 HP DL180 G6 1 4 7 10 2 5 8 1...

How to use NFOrce API tools

This guide will tell you how to use the API tools with your NFOrce services.In order to use thes...

Testing LACP Bonding on Linux

To ensure your newly configured link-aggregation is working to it's full potential, you can eith...

Windows Server 2008 R2 NIC Teaming

Windows Server 2008 does not come with a bonding or teaming feature built in by default, and has...

Manually creating a BIOS Boot Partition

When using a disk larger than 2TB, you will be forced to use a GUID Partition Table (GPT), which ...

Windows Networking: "Dependency service or group failed to start"

Windows Networking service is not able to run with the Windows Event Log service.If the Windows ...

Drive unusable due to old RAID metadata

During an installation of most Linux distributions, you might run into an unreadable or unmanage...

Can't remove RAID device used as swap

When drives still pertain old RAID metadata, and the raid device used for swap is still present,...

Disabling dhcp in Debian based Linux systems

When a Debian based Linux Operating System boots with DHCP enabled (thus defined in the network ...

SMART Data through HP Raid Controller

To be able to view the SMART data of disks behind a raid controller, the driver for the controll...

LACP Bonding on Ubuntu 18.04 (Netplan)

Use your favourite text editor to open the netplan config .yaml file. nano /etc/netplan/01-netc...

Back to top