Recently Updated Pages

HP SL4540 Gen8 - Clearing a Zoned Storage Configuration

The following would have to be done via an Operating System with (hp)ssacli or hpacucli installe...

Installing iperf on CentOS

CentOS does not come with the epel repository enabled by default, which has the iperf package av...

LACP Bonding on CentOS 6/7/8

For convenience's sake, navigate to the folder which all the network scripts reside in cd /etc/...

Making use of tagged VLANs in Linux

To be able to make use of tagged VLANs in Linux, both the Operating System and the switch need t...

mount: unknown file system type LVM2_member

You may run into this error when trying to mount an LVM filesystem whilst the Operating System i...

New disks not seen in Linux

If new disks have been added to a server, and they're not yet visible to your Unix based Operati...

Forcing a rescan on a SCSI host on Linux

When adding disks to a server that supports hotswappable disks, it sometimes fails to recognize ...

Configuring a Static IPv4 Address in Linux

Debian Based (Debian & Ubuntu up to 17.04) Use your favourite text editor to edit the networ...

mdadm: Replacing a faulty drive

First, which drive is failed will have to be determined, which can be read from the mdstat file ...

LACP Bonding on Ubuntu 14.04/16.04

Before you proceed with the configuration of bonding, ensure ifenslave is installed. apt instal...

Change IPMI Interface via ipmitool (Supermicro)

Most older version of remote management do not support changing the interface IPMI communcation ...

LACP Bonding on Debian 8/9/10

Before you proceed with the configuration of bonding, ensure ifenslave is installed. apt instal...

MegaRAID - Creating a RAID10 Array

This guide will guide you through the creation of a RAID 10 array via the MegaRAID BIOS Config U...

How to configure reverse DNS in the SSC

This guide will tell you how to set a PTR (configure rDNS) using the SSC.# Configuring rDNS- Log...

HP DL120 Gen6 fan issue after firmware upgrade

When updating the firmware of an HP DL120 G6 chassis you may encounter the server no longer goin...

Sub-optimal performance on an HP DL380p Gen8 server

Certain combinations of Operating Systems with the HP DL380p Gen8 server may result in poor hard...

Windows on a hardware raid array larger than 2TB

Windows can not be installed using GPT on a Legacy system, which includes all of our HP lineup u...

Windows Server 2019: CPU Usage HP Gen7/8

Description: With the current version of Windows Server 2019, you may experience a bug in combin...

Mounting a new disk in Linux

This guide will assume the new disk is empty. If this is not the case, ignore the steps marked re...

Mount virtual media in iLO 4

Java Web Start To mount any virtual media in iLO 4 connect to the passthru by using the informat...

Back to top